60-Pin Header

Hirose DF12D(3.0)60DP0.5V80.
 The 60-pin connector has 0.5mm pitch and an interboard distance of 3mm. So, working with the 60-pin connector requires using surface mount pads and techniques.

For connecting a custom-made board to a gumstix motherboard via the 60-pin hirose connector, hirose part #DF12D(3.0)-60DP-0.5V(80) or an acceptable variant is required on the daughtercard side. Check the datasheet to determine what part numbers would be considered acceptable variants.

Hirose #DF12D(3.0)-60DP-0.5V(80) (Digikey part #H2752-ND) and its metal/bossed variant, DF12(3.0)-60DP-0.5V(80) (Digikey part #H2755-ND), are no longer stocked by Digikey.

RoHS Replacement for #DF12D(3.0)-60DP-0.5V(80) (Digikey part #H2752-ND Obsolete) is #DF12D(3.0)-60DP-0.5V(81) (Digikey part #H5221TR-ND in stock, min.1ku)

RoHS Replacement for #DF12(3.0)60DP0.5V(80) (Digikey part #H2755-ND Obsolete) is #DF12(3.0)-60DP-0.5V(86) (Digikey part #H5224TR-ND in stock, min.1ku)

Currently in stock at Digikey is the hirose #DF12D(3.0)-60DP-0.5V(81), Digikey part #H5221CT-ND, which is priced at $3.20 in single quantities. This connector matches the physical dimensions and characteristics of the #DF12D(3.0)-60DP-0.5V(80).

If you plan on using a connector variant other than the #DF12D(3.0)-60DP-0.5V(**), be sure to check the datasheet listed above for dimensions as well, as they may vary from connector to connector.

Both the gumstix basix and the connex motherboards are 80mm x 20mm (i.e. diagonal corners at (0.00,0.00) and (80.00,20.00) and the 60-pin Hirose connector is centered at (7.00,9.25) on the primary side, oriented with its long axis parallel to the y axis.

Location on the gumstix-f motherboard is available here as PDF and here as DXF.

verdex pro and verdex 60-pin connector:

Pin GPIO Signal Signal GPIO Pin
1 · GND GND · 60
2 GPIO(67) L_DD09 USBH_N2 · 59
3 GPIO(77) L_BIAS BITCLK GPIO(28) 58
4 GPIO(61) L_DD03 L_PCLK GPIO(76) 57
5 GPIO(30) SDATA_OUT L_DD15 GPIO(73) 56
6 GPIO(66) L_DD08 L_DD14 GPIO(72) 55
7 · GND FF_RXD GPIO(34) 54
8 GPIO(71) L_DD13 L_DD07 GPIO(65) 53
9 GPIO(70) L_DD12 L_DD05 GPIO(63) 52
10 GPIO(69) L_DD11 L_DD10 GPIO(68) 51
11 · USBH_P2 L_DD01 GPIO(59) 50
12 GPIO(46) IR_RXD NACRESET GPIO(113) 49
13 GPIO(60) L_DD02 IR_TXD GPIO(47) 48
14 GPIO(100) FF_CTS L_DD04 GPIO(62) 47
15 GPIO(9) CLK_32 SYNC GPIO(31) 46
16 GPIO(75) L_LCLK SSPRXD2 GPIO(11) 45
17 GPIO(17) PWM1 SSPSFRM2 GPIO(14) 44
18 GPIO(58) L_DD00 SDATA_IN0 GPIO(29) 43
19 GPIO(118) I2C_SDA GND · 42
20 GPIO(117) I2C_SCL L_FCLK GPIO(74) 41
21 GPIO(19) SSPSCLK2 L_DD06 GPIO(64) 40
22 GPIO(87) L_DD17 FF_RTS GPIO(27) 39
23 GPIO(13) SSPTXD2 · GPIO(101) 38
24 GPIO(41) OTG_ID N_MANUAL_RESET · 37
25 GPIO(2) SYS_EN PWM0 GPIO(16) 36
26 GPIO(39) FF_TXD BT_TXD GPIO(43) 35
27 GPIO(86) L_DD16 BT_RTS GPIO(45) 34
28 · V_BATT BT_RXD GPIO(42) 33
29 · V_BATT BT_CTS GPIO(44) 32
30 · V_BATT GND · 31

Note: Schematic images and charts below are from the point of view of the gumstix looking at the connector from the daughtercard's point of view, these signals are mirrored

Note: This pinout is for the GS270 versions R1205, R1365, and R1511. It may be subject to change in future revisions.

 

Connex/Basix

Signal GPIO Pin Signal GPIO Pin
GND · 1 GND · 60
L_DD09 GPIO(67) 2 USB_N · 59
L_BIAS GPIO(77) 3 BITCLK GPIO(28) 58
L_DD03 GPIO(61) 4 L_PCLK GPIO(76) 57
SDATA_OUT GPIO(30) 5 L_DD15 GPIO(73) 56
L_DD08 GPIO(66) 6 L_DD14 GPIO(72) 55
GND · 7 FF_RXD GPIO(34) 54
L_DD13 GPIO(71) 8 L_DD07 GPIO(65) 53
L_DD12 GPIO(70) 9 L_DD05 GPIO(63) 52
L_DD11 GPIO(69) 10 L_DD10 GPIO(68) 51
USB_P · 11 L_DD01 GPIO(59) 50
IR_RXD GPIO(46) 12 NACRESET · 49
L_DD02 GPIO(60) 13 IR_TXD GPIO(47) 48
FF_CTS GPIO(35) 14 L_DD04 GPIO(62) 47
SDATA_IN1 GPIO(32) 15 SYNC GPIO(31) 46
L_LCLK GPIO(75) 16 NSSP_RXD GPIO(84) 45
PWM(1) GPIO(17) 17 NSSP_FRAME GPIO(82) 44
L_DD00 GPIO(58) 18 SDATA_IN0 GPIO(29) 43
I2C_SDA · 19 GND · 42
I2C_SCL · 20 L_FCLK GPIO(74) 41
NSSP_CLK GPIO(81) 21 L_DD06 GPIO(64) 40
BT_RXD GPIO(42) 22 FF_RTS GPIO(41) 39
NSSP_TXD GPIO(83) 23 DRQ0 GPIO(20) 38
BT_CTS GPIO(44) 24 NRESET · 37
BT_TXD GPIO(43) 25 PWM(0) GPIO(16) 36
FF_TXD GPIO(39) 26 HW_TXD GPIO(48) 35
BT_RTS GPIO(45) 27 HW_RTS GPIO(51) 34
V_BATT · 28 HW_RXD GPIO(49) 33
V_BATT · 29 HW_CTS GPIO(50) 32
V_BATT · 30 GND · 31

Note: Schematic images and charts below are from the point of view of the COM looking at the connector. From the daughtercard's point of view, these signals are mirrored.

Layout of older 60-pin connector

You can check if this connector is on your COM  by using the reference table on the Gumstix motherboard I/O page.

Note: Schematic images and charts below are from the point of view of the gumstix looking at the connector from the daughtercard's point of view, these signals are mirrored.

Signal GPIO Pin Signal GPIO Pin
GND · 1 GND · 60
L_DD(9) GPIO(67) 2 USB_N · 59
L_BIAS GPIO(77) 3 BITCLK GPIO(28) 58
L_DD(3) GPIO(61) 4 L_PCLK GPIO(76) 57
SDATA_OUT GPIO(30) 5 L_DD(15) GPIO(73) 56
L_DD(8) GPIO(66) 6 L_DD(14) GPIO(72) 55
GND · 7 FFRXD GPIO(34) 54
L_DD(13) GPIO(71) 8 L_DD(7) GPIO(65) 53
L_DD(12) GPIO(70) 9 L_DD(5) GPIO(63) 52
L_DD(11) GPIO(69) 10 L_DD(10) GPIO(68) 51
USB_P · 11 L_DD(1) GPIO(59) 50
IRRXD GPIO(46) 12 NACRESET · 49
L_DD(2) GPIO(60) 13 IRTXD GPIO(47) 48
FFCTS GPIO(35) 14 L_DD(4) GPIO(62) 47
SDATA_IN1 GPIO(32) 15 SYNC GPIO(31) 46
L_LCLK GPIO(75) 16 NSSP_TXD_RXD GPIO(84) 45
PWM(1) GPIO(17) 17 NSSP_FRAME GPIO(82) 44
L_DD(0) GPIO(58) 18 SDATA_IN0 GPIO(29) 43
I2C_SDA · 19 GND · 42
I2C_SCL · 20 L_FCLK GPIO(74) 41
NSSP_CLK GPIO(81) 21 L_DD(6) GPIO(64) 40
TDO · 22 FFRTS GPIO(41) 39
NSSP_TXD_RXD GPIO(83) 23 NTRST · 38
TDI · 24 NRESET · 37
TMS · 25 PWM(0) GPIO(16) 36
FFTXD GPIO(39) 26 HWTXD GPIO(48) 35
TCK · 27 HWRTS GPIO(51) 34
V_BATT · 28 HWRXD GPIO(49) 33
V_BATT · 29 HWCTS GPIO(50) 32
V_BATT · 30 GND · 31